Posts Tagged ‘carpet shading’

Carpet Problems: All About Carpet Pile Reversal

Tuesday, February 18th, 2014

As discussed in a recent blog post, carpet shading is an apparent color difference between areas of the same carpet. Shading is seen all over a cut pile carpet. Pile reversal or reverse pile is an extreme form of shading with the pile yarns laying on their sides, causing the carpet to look darker in the affected areas. You see it mostly in high-traffic areas (think hallways) or at pivot points (like doorways). Pile reversal is similar to crushed-velvet furniture fabrics, with light and dark shades.

Some people think shading and pile reversal are ugly because the color is uneven. Others consider it the mark of a fine quality carpet. Oriental rugs often have shading or pile reversal. But the rugs’ ornate patterns tend to make these conditions less noticeable. At any rate, mills will not replace a carpet for pile reversal because they know the replacement will probably reverse, too. (more…)

Carpet Problems: All About Carpet Shading

Tuesday, February 11th, 2014

carpet shading

Carpet shading is an apparent color difference between areas of the same carpet. It is a common complaint with cut pile carpets. The industry considers it a “normal characteristic of cut pile fabrics.” Shading ranges in intensity from slight to severe. It is caused by the face yarns changing the direction of their lay. Footprints and vacuum wheel marks are two types of shading, caused when the yarns are crushed down.

You also sometimes see shading along a seam. One side looks lighter than the other when you enter a room. Then when you walk to the other end of the room and look back, it (more…)