Posts Tagged ‘carpet seaming’

Carpet Discoloration: Heat Damaged Carpet Seams

Tuesday, August 26th, 2014

discolored carpet seam | Glenn Revere

Making tufted carpet is complicated. Several steps in the process use heat. Some of those steps include twisting yarn, dyeing yarn, and curing the carpet backings. So heat and carpet is a good combination, right? Well, not always.

Heat can also damage carpet, as today’s Flooring Inspection Safari illustrates:

A high quality nylon carpet was installed in a second story condo. Approximately 18-24 months after the installation, the renter noticed the carpet was fading from tan to pink along the seams! The carpet had not been cleaned yet. The renter, acting on the owner’s behalf, turned in a claim. I was asked to inspect the job for the manufacturer. As always, I looked at the overall installation to make sure it mets industry quality standards. I have duplicated the main portion of my inspection report here. It explains my findings: (more…)

How to Seam Carpet and Why Carpet Seaming is Important

Tuesday, April 22nd, 2014

carpet seam sealing | Glenn Revere

Installing carpet correctly is not an easy job. There is more to it than “fuzzy side up”! An installer can spend years learning about the finer points of his (or her) craft. One key point that is frequently skipped completely is carpet seaming. “What is that?” you might ask.

Carpet is a fabric that is cut off a long roll and then cut again as needed to fit a room or rooms. Unless the rooms are slightly smaller than width of the carpet, the pieces must be seamed (joined) together into larger pieces to fit the rooms to be carpeted. (more…)