Posts Tagged ‘carpet care’

Carpet Care: How to Remove Halloween Carpet Stains

Thursday, October 9th, 2014

 

halloween pumpkins

I thought it’d be seasonally appropriate to provide some how-to help on removing Halloween carpet stains (e.g. fake blood, hard candy, makeup and more).

Here are some articles I found to help you keep your carpets clean this Halloween!

How to Remove Hard Candy from Carpet

How to Remove Candy, Makeup and Chocolate from Carpet

How to Clean Carpet Stains: Fake Blood, Pumpkin, Candle Wax and More

I hope you have a safe and festive holiday…and that you’re able to keep your carpets clean. (more…)

Carpet Care: Is It Possible to Vacuum Too Much?

Thursday, September 25th, 2014

Q: Is it possible to vacuum too much?

Answer: I’m often asked if a carpet can be vacuumed too much. Today’s synthetic fabrics are made to be vacuumed. Many maintain their appearance only by vacuuming. Normally, most vacuums work well with most kinds of fabrics, but some heavy duty machines teamed with delicate fibers such as wool or soft, fine nylon can cause problems. Strong motors and stiff brushes can distort cut-pile patterns and make Berber-type looped fabrics look fuzzy or stringy. A vacuum brush that is soft to medium in stiffness is the safest for most carpets. If your vacuum has adjustable brushes, it is also better to set the brushes higher rather than lower. You should feel little resistance against the carpet when you vacuum. Some manufacturers suggest that it is better for the brushes to barely touch the pile. This prevents you from beating the carpet to death. (more…)

Carpet Care: How Often Should I Vacuum?

Tuesday, September 23rd, 2014

I often get asked by clients and friends: How often should I vacuum? Well, here’s the answer.

It is recommended that under average household conditions (four people, one pet), a carpet should be vacuumed at least twice a week — once lightly, once thoroughly.

A light vacuuming means two to three forward and back overlapping passes of the machine in each of the high-traffic areas, with one pass in the low traffic areas.

Regular vacuuming is probably the single most helpful thing a person can do to (more…)

The Importance of Proper Carpet Care

Thursday, August 21st, 2014

carpet vacuum

What can you do to keep your beautiful and expensive carpet looking showroom new? Plan to care for your carpet in a number of ways involving both short- and long-term maintenance.

In the short term, regular vacuuming and spotting works wonders to keep the carpet looking good. Over the long term, plan on (and budget for) regular professional cleaning to maintain your investment.

Most carpet warranties require periodic professional (more…)

Flooring Inspection Safari: Causes of Dirty Carpet

Tuesday, July 22nd, 2014

soapy carpet spot | carpet expert Glenn Revere

In a previous post, I discussed why a three-year-old carpet stayed clean after its first cleaning, but quickly soiled after its second cleaning. Sometimes, even a brand new carpet starts to “soil up” after just a few weeks. Here’s why.

Carpet mills have to add a detergent-based lubricant to any synthetic fiber (nylon, polyester, or olefin) when they spin it into carpet yarn. Otherwise, the heat from the spinning process could damage the fiber. This is called a spin finish. This lubricant is normally removed during the production process. But mistakes happen. Sometimes the spin finish stays in the carpet instead of getting removed. You can’t see it. When the new carpet is installed in your home, dirt starts to (more…)

Flooring Inspection Safari: Proper Carpet Cleaning

Tuesday, July 8th, 2014

carpet cleaning | carpet expert Glenn Revere

I received an inspection request from a carpet manufacturer. The carpet had been installed for 3 1/2 years. It had been cleaned twice. The complaint was: “carpet looks terrible, appears soiled after cleaning.” My job was to see how the carpet was holding up and to check the soil/stain resistance of the fiber.

When I arrived at the well-maintained home, I saw that the main floor was ceramic tile. The carpet in question was installed on the stairs, and in the upstairs hallway and connecting master bedroom.

The last carpet cleaning had been done (more…)

Carpet Problems: All About Carpet Shading

Tuesday, February 11th, 2014

carpet shading

Carpet shading is an apparent color difference between areas of the same carpet. It is a common complaint with cut pile carpets. The industry considers it a “normal characteristic of cut pile fabrics.” Shading ranges in intensity from slight to severe. It is caused by the face yarns changing the direction of their lay. Footprints and vacuum wheel marks are two types of shading, caused when the yarns are crushed down.

You also sometimes see shading along a seam. One side looks lighter than the other when you enter a room. Then when you walk to the other end of the room and look back, it (more…)

Carpet Problems: The Difference Between Crushing and Matting

Tuesday, February 4th, 2014

Crushing and matting are two common problems that are easy to confuse. Crushing is the flattening down of face yarns through normal use, especially with cut pile carpets. Carpeted traffic areas like hallways typically show crushing. An area directly in front of furniture, such as a chair facing the TV, will crush. When the carpet is vacuumed, the pile should stand up again. It is normal for the tip of the tuft to open. This is called blossoming or blooming.

Matting is more noticeable. It occurs when the tips of cut pile yarns untwist and fray, then get tangled with neighboring tufts. If the tufts untwist one-third of their length or more, and if the affected carpet is widespread and not a confined area subject to unusual usage, the carpet is generally considered defective if it is less than a year old.

Matting and untwisting happen because the heat-set of the yarn is weak. Plied yarns are put through a process that crimps the yarns, twists them, and then (more…)

Carpet Pilling: Common Causes and Solutions

Thursday, January 30th, 2014

Carpet pilling is a condition directly related to carpet shedding. Sometimes the vacuum cleaner cannot keep up with the amount of fluff coming from the pile. The brushes are unable to completely pull the fuzz from the carpet pile. The fluff collects on the surface of the carpet. With walking, the fuzz rolls up into little balls called pills. Soon the carpet looks like an old sweater.

If the vacuum isn’t working properly to remove shedding, your carpet will pill. Check to make sure the belt is on correctly. Is the vacuum bag more than half full? Empty it. Is the brush set at the right height? Proper height adjustment allows the brushes to remove the fuzz without overly beating the pile.

If the vacuum is working efficiently and the carpet is pilling, call your retailer. He may need to call for a carpet inspector to determine the cause of the pilling. Sometimes an unused piece of scrap can be sent to a testing laboratory to see if it’s made correctly.

If the carpet is okay, the pills can be removed by (more…)

Carpet Buying: Is There a “Footprint Free” Carpet?

Tuesday, January 28th, 2014

footprint free carpet | carpet expert Glenn Revere

What happens when you pay for a horse but get a mule? Or in this case, you thought you bought a “footprint free” carpet but as soon as it was installed you knew you had been taken?

I was recently hired by a woman who was in this situation. She explained that she had asked her salesperson for a carpet that doesn’t show footprints. The salesperson showed her a sample of a carpet that the salesperson said would not show footprints or traffic patterns. My client bought the carpet. The day it was installed she saw that it certainly showed footprints. She called the store the next day. The store had just gone out of business! The doors were closed!

My client spent months tracking down the store owner. She finally found him. He arranged for the carpet mill to send an inspector to (more…)