Posts Tagged ‘carpet backing’

Carpet Problems: Carpet Delamination Causes

Tuesday, May 27th, 2014

Carpet delamination means the secondary backing separates from the primary backing and air gets between the two layers. This condition can be manufacturing, installation, maintenance or consumer related. The minimum standard for lamination strength is 2.5 pounds. Sometimes the latex compound formula has the wrong proportions. Then the glue will not cure properly. If it is too moist, the glue is weak. If it is too dry, normal traffic in your home turns the compound to powder; then the carpet will wrinkle and delaminate.

Thin latex makes the carpet feel soft before it delaminates. Getting a carpet too wet by improper cleaning or flooding also breaks down the latex. Spilling nail polish remover, oil, or other contaminants will cause delamination in small areas. Unsealed seams can cause a carpet to separate and delaminate along these cut edges. (more…)

Flooring Inspection Safari: Bubbled and Wrinkled Carpet Backing

Thursday, February 20th, 2014

wrinkled carpet backing | Glenn Revere

Recently, I received an inspection request from a major carpet manufacturer. The complaint involved carpet yarns pulling from the carpet backing.

The carpet was installed throughout a large, well-maintained two-story home. The consumer explained to me that she had found carpet yarns pulled from the backing throughout the installation. She acknowledged that she has a dog and two cats. But she was adamant that her pets had not damaged the carpet.

The carpet texture was a cut and loop pattern. The pattern formed a small grid. When I looked around the rooms, I noticed that (more…)